| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.185 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
2.020 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.233 INCHES NOMINAL |
| CWMX |
FIRST LEG CUTOUT LENGTH |
0.950 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.010 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.795 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.437 NOMINAL INCHES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.270 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.676 INCHES NOMINAL |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
1.480 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.020 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.515 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH LEGS |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLL |
SECOND LEG LENGTH |
1.140 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |