| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHQN |
FIRST LEG WIDTH |
1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-23377 W/ PLASTIC POLYAMIDE MIL SPEC SINGLE TREATMENT RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.490 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.490 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 T81 FED SPEC SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |