| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC AND PLASTIC POLYURETHANE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
1.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
4 HOLES,0.150 IN.DIA,ARE INCLUDED ON FIRST LEG,SURROUNDING MAIN HOLE |
| AHLF |
SECOND LEG WIDTH |
3.000 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
1.062 INCHES MINIMUM AND 1.082 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-46168 MIL SPEC 2ND TREATMENT RESPONSE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHQN |
FIRST LEG WIDTH |
3.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.500 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.125 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |