| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE,COMP 70,HALF HARD ASSN STD 1ST MATERIAL RESPONSE OR QQ-B-613,COMP 1 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-613,COMP 2 FED SPEC 3RD MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.812 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.625 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.219 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.438 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.031 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLG |
SECOND LEG CORNER RADIUS |
0.031 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.577 INCHES MINIMUM AND 0.586 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.250 INCHES NOMINAL |
| MATT |
MATERIAL |
COPPER ALLOY OR COPPER ALLOY 268 OR COPPER ALLOY 260 |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |