| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.326 INCHES MINIMUM AND 0.331 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NUT |
| FEAT |
SPECIAL FEATURES |
SIX COUNTERSUNK HOLES 0.096 IN. MIN,0.101 IN. MAX DIA,100.0 DEGREES X 0.165 IN. |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
13.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PAINT |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
WW-T-700/6 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
13.500 INCHES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
CID STD0985A0160 FSCM 54497 MFR REF SINGLE TREATMENT RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.312 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
5.750 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |