| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9,TEMPER T5 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
2.000 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.240 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CUT OUT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2 ADDITIONAL HOLES LOCATED 0.234 IN. ABOVE OTHER HOLES IN 2ND LEG |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.166 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| CWNX |
SECOND LEG CUTOUT WIDTH |
1.734 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.166 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.140 INCHES NOMINAL |
| CWNN |
SECOND LEG CUTOUT LENGTH |
0.820 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
3.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.234 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |