| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHQN |
FIRST LEG WIDTH |
4.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.560 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.910 INCHES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
1.120 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/4,H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5,H111 FED SPEC 2ND MATERIAL RESPONSE |
| AHQQ |
FIRST LEG END WIDTH |
2.000 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLH |
SECOND LEG END WIDTH |
2.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.499 INCHES MINIMUM AND 0.504 INCHES MAXIMUM |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
NUT ATTACHED TO HOLE ON FIRST LEG |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.500 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.720 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |