| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
3.120 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
5.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
7.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209,H32 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.380 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
5.500 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE FIRST LEG |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS W/ TONGUE |
| AHQN |
FIRST LEG WIDTH |
2.000 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.100 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
8.500 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.100 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
5.500 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.310 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.100 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.310 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FIRST LEG SQUARE EDGE CENTER SECTION HAS FOUR SLOTS 0.500 IN. LG,0.310 IN. W,TWO HOLES 0.685 IN. MIN,0.697 IN. MAX DIA |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |