| ADLK |
FIRST LEG LENGTH |
0.900 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.094 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQQ |
FIRST LEG END WIDTH |
1.980 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.187 INCHES MINIMUM AND 0.191 INCHES MAXIMUM |
| AHLH |
SECOND LEG END WIDTH |
1.240 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.443 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.580 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.094 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3,T3511 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.740 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.217 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.383 NOMINAL INCHES |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHQN |
FIRST LEG WIDTH |
2.580 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |