| AHLN |
SECOND LEG HOLE DIAMETER |
0.200 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| FEAT |
SPECIAL FEATURES |
SECOND LEG INCLUDES 0.190-24 UNC 2B NUT AND 0.125 IN. SQUARE PLATE |
| AHLL |
FIRST LEG SLOT LENGTH |
0.620 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.600 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.710 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLM |
FIRST LEG SLOT WIDTH |
0.280 INCHES MINIMUM AND 0.336 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/4 H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5 H111 FED SPEC 2ND MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.855 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.880 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.120 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.120 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |