| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.630 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.625 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.500 NOMINAL INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-22750 MIL SPEC ALL TREATMENT RESPONSES |
| AHQQ |
FIRST LEG END WIDTH |
1.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.000 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH LEGS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.380 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PLASTIC POLYAMIDE AND PLASTIC EPOXY |
| AHQN |
FIRST LEG WIDTH |
1.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLF |
SECOND LEG WIDTH |
1.750 INCHES NOMINAL |