| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MMS425,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
NUT ATTACHED FOR LEFT HAND APPLICATION |
| SFTT |
SURFACE TREATMENT |
PRIMER |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLG |
SECOND LEG CORNER RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 T81 FED SPEC ALL MATERIAL RESPONSES |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |