| AHLK |
FIRST LEG HOLE DIAMETER |
0.112 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,TEMP H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.718 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.130 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CUT OUT |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.360 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SECOND LEG HAS A 2.298 IN. BY 0.450 IN. OPENING EXTENDING INTO FIRST LEG |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.109 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.270 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.512 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| CWMX |
FIRST LEG CUTOUT LENGTH |
0.512 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.000 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.718 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| CWMZ |
FIRST LEG CUTOUT WIDTH |
2.298 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |