| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
69.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
69.000 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.156 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5-T3 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AHPZ |
CENTER SECTION HEIGHT |
6.190 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.156 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.156 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ALPS P-6,01413 MFR REF SINGLE TREATMENT RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQA |
CENTER SECTION WIDTH |
69.000 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.280 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG TWO MTG HOLES 0.192 IN. MIN 0.196 IN. MAX DIA AND FOUR MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA; CENTER LEG EIGHT MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA,TWO MTG HOLES 0.065 IN. MIN 0.071 IN. MAX DIA,THREE MTG HOLES 0.280 IN. MIN 0.287 IN. MAX DIA; BEND RADIUS 0.650 IN.; STENCIL LEGEND READS HANDBOOK INSIDE W/ARROW POINTER |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
7.235 INCHES MINIMUM AND 7.265 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.500 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |