| AHLN |
SECOND LEG HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
EXTENDED LEG ON SIDE OF SECOND LEG FURN W/TWO HOLES 0.191 IN. MIN. 0.199 IN. MAX DIA,1.500 IN. LG,2.380 IN. W,0.090 IN. THK |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.326 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.880 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.620 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.361 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.968 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.968 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.250 NOMINAL INCHES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLF |
SECOND LEG WIDTH |
1.880 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.690 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |