| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.620 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
S6105-2012-2,CAGEC 78286 MFR REF SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
0.620 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-8585 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLL |
SECOND LEG LENGTH |
1.510 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.430 INCHES NOMINAL |
| CSSZ |
SECOND LEG OFFSET ANGLE |
93.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.690 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE ZINC |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.430 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.620 NOMINAL INCHES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |