| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
595,YELLOW,NUMBER 13538 FED STD SINGLE TREATMENT RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFP |
FIRST LEG END RADIUS |
62.750 INCHES MINIMUM AND 66.750 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ANGLE IS BENT AT 62.000 IN. MIN,66.000 IN. MAX RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AKBU |
SECOND LEG STYLE |
EXTENDED FLAT |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.160 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
9.480 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
10.480 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.160 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
10.480 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.410 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |