| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/7,H32 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/4,H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/6,H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5,H111 FED SPEC 2ND MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
1.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.880 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
1.000 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLL |
SECOND LEG LENGTH |
1.310 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.880 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.313 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |