| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.438 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.400 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
EXTENDED FLAT |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.600 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A167,COND A ASSN STD SINGLE MATERIAL RESPONSE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.188 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.200 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
FIRE DETECTION SYS;C5A |
| MATT |
MATERIAL |
STEEL COMP 304 |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.199 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE |
| FEAT |
SPECIAL FEATURES |
LEFT HAND TUBE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |