| SFTT |
SURFACE TREATMENT |
ENAMEL SEMIGLOSS AND PHOSPHATE AND PRIMER |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.313 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
12.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.484 INCHES MINIMUM AND 3.516 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
12.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A304-79 ASSN STD SINGLE MATERIAL RESPONSE |
| ADLK |
FIRST LEG LENGTH |
1.375 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.563 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-529 FED SPEC 1ST TREATMENT RESPONSE AND TT-C-490 FED SPEC 2ND TREATMENT RESPONSE AND TT-P-664 FED SPEC 3RD TREATMENT RESPONSE OR MIL-P-53030 MIL SPEC 4TH TREATMENT RESPONSE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
10.484 INCHES MINIMUM AND 10.516 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
1.125 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPX |
SECOND LEG THICKNESS |
0.562 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG CHAMFERED 0.625 IN. BY 45.0 DEG ALONG TWO INTERIOR UNDERSIDE EDGES; MTG HOLES IN SECOND LEG CONTINUE THRU THE THICKNESS OF THE FIRST LEG |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |