| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.935 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6 H321 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/4 H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5 H111 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/7 H32 FED SPEC 2ND MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
1.880 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-22750 TY 1 MIL SPEC ALL TREATMENT RESPONSES |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| FEAT |
SPECIAL FEATURES |
ONE ADDITIONAL HOLE LOCATED ALONG EDGE OF FIRST LEG,0.380 IN. MIN AND 0.416 IN. MAX DIA,0.620 IN. DEEP |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQN |
FIRST LEG WIDTH |
3.500 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY AND PLASTIC POLYAMIDE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.630 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
3.190 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |