| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.312 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.425 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHQN |
FIRST LEG WIDTH |
0.250 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.089 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.425 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.165 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQB |
CENTER SECTION THICKNESS |
0.120 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG BEVELVED ON BOTTOM 0.060 IN. BY 45 DEG |
| CSSZ |
SECOND LEG OFFSET ANGLE |
15.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 304 |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.116 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.270 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.145 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE |
| AHPZ |
CENTER SECTION HEIGHT |
0.201 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET DOUBLE ANGLE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.130 INCHES NOMINAL |