| CWPG |
SECOND LEG CHAMFER ANGLE |
28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ZZZY |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| FEAT |
SPECIAL FEATURES |
OPPOSITE OF KH394B |
| AHQN |
FIRST LEG WIDTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.0597 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| TEST |
TEST DATA DOCUMENT (NON-CORE) |
81349-MIL-P-23199 SPECIFICATION |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| MATT |
MATERIAL |
STEEL COMP 304 |
| AHPX |
SECOND LEG THICKNESS |
0.0597 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.560 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| SPCL |
SPECIAL TEST FEATURES (NON-CORE) |
SPECIAL QUALITY CONTROL TESTING |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHQP |
FIRST LEG CORNER RADIUS |
0.120 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY MATERIAL |