| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.255 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
10.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
9.100 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.825 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.595 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.800 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLF |
SECOND LEG WIDTH |
10.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |