| AHLK |
FIRST LEG HOLE DIAMETER |
0.064 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.523 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.075 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
7.400 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
7.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.147 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.675 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.650 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLK |
FIRST LEG LENGTH |
0.435 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SEVEN HOLES FIRST LEG ALONG W |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |