| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
0.560 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.187 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11-T6 OR T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHMA |
SECOND LEG SLOT WIDTH |
0.297 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHQN |
FIRST LEG WIDTH |
0.760 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.690 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |