| AHQQ |
FIRST LEG END WIDTH |
2.900 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.390 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLF |
SECOND LEG WIDTH |
3.400 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.988 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.375 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
2.310 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLK |
FIRST LEG LENGTH |
1.125 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.199 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.798 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
1.220 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.340 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11-T6511 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.400 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.545 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.812 INCHES NOMINAL |