| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.440 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.388 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.809 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
4.809 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.060 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-T-81556 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.169 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.450 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.706 NOMINAL INCHES |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
1.174 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1 OF 3 HOLES IN 2ND LEG 0.237 IN. MIN,0.243 IN. MAX DIA |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
RIB STIFFENER FIRST LEG |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.711 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.660 INCHES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |