| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.100 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.610 INCHES MINIMUM AND 1.680 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.390 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.455 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
1.610 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AHQN |
FIRST LEG WIDTH |
1.660 INCHES MINIMUM AND 1.680 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.892 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.101 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
1.062 INCHES MINIMUM AND 1.082 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.550 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |