| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.560 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.219 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.380 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
2.880 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| ADLK |
FIRST LEG LENGTH |
0.880 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.245 NOMINAL INCHES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQN |
FIRST LEG WIDTH |
3.380 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.204 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.375 INCHES NOMINAL |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
2.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.755 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
2.880 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |