| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.688 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.093 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
2.380 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.140 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| AHLF |
SECOND LEG WIDTH |
2.380 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL1A MIL SPEC SINGLE TREATMENT RESPONSE |
| ADLK |
FIRST LEG LENGTH |
0.280 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.472 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLL |
SECOND LEG LENGTH |
0.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.213 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.190 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.067 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.875 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |