| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
4.060 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHQN |
FIRST LEG WIDTH |
4.380 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| AHLF |
SECOND LEG WIDTH |
4.380 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| CSSQ |
FIRST LEG ANGLE |
0.090 RADIANS MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLG |
SECOND LEG CORNER RADIUS |
0.190 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.750 NOMINAL INCHES |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.940 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.750 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.188 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SUPPORT INCLUDES SIX CAPTIVE NUTS;P/N CLS632-3 AND P/N CLSS032-2 |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |