| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.510 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.153 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.300 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.920 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ITEM IS PART OF AN ASSEMBLY REQUIRING 4 STUD CAPTIVE P/N 153061-84 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.150 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AGAV |
END ITEM IDENTIFICATION |
AN/ALQ-184(V) ECM SYSTEM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.159 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.150 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.150 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.150 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.300 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.200 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MILC-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.120 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |