| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| ADLK |
FIRST LEG LENGTH |
0.525 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.525 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.425 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.350 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |