| ADLK |
FIRST LEG LENGTH |
0.900 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.343 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
7.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.510 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
50.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.750 NOMINAL INCHES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.360 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.211 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLH |
SECOND LEG END WIDTH |
7.700 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.680 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
9.200 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
6.687 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.400 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8, TEM H32 FED SPEC SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
9.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |