| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.370 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
1.060 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.938 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.316 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.312 INCHES MINIMUM AND 0.326 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.950 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1046 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1 HOLE ON FIRST LEG HAS DIA. OF 0.316 IN. MIN 0.320 IN. MAX |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AFJH |
FURNISHED ITEMS (NON-CORE) |
4 WELDNUTS |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.000 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH LEGS |
| AHQN |
FIRST LEG WIDTH |
6.000 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.1046 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.060 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |