| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, CL 1A OR 3 MIL SPEC 2ND TREATMENT RESPONSE |
| AHQA |
CENTER SECTION WIDTH |
1.440 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.440 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM AND CHROMATE |
| ADLL |
SECOND LEG LENGTH |
2.120 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.940 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.174 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.440 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLM |
FIRST LEG SLOT WIDTH |
0.473 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 TEMPER H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.720 INCHES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
1.200 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET DOUBLE ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.190 INCHES NOMINAL |