| AHPX |
SECOND LEG THICKNESS |
0.1200 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.7500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI-1008 ASSN STD SINGLE MATERIAL RESPONSE OR AISI-1020 ASSN STD SINGLE MATERIAL RESPONSE |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ZZZY |
| ADLK |
FIRST LEG LENGTH |
1.6200 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.1200 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.1960 INCHES NOMINAL |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
| FEAT |
SPECIAL FEATURES |
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIA PRODUCTION STANDARD NO. PO0172NRP |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.5000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
8.5000 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.2500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.3100 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLF |
SECOND LEG WIDTH |
0.6300 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.3100 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.1960 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.3750 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1008 OR STEEL COMP 1020 |
| AHQN |
FIRST LEG WIDTH |
0.6300 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 RADIANS NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |