| CWYC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES |
1.143 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.312 INCHES NOMINAL |
| MATT |
MATERIAL |
PLASTIC |
| CWXN |
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER |
0.219 INCHES NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| ABMK |
OVERALL WIDTH |
0.394 INCHES NOMINAL |
| BYGG |
BLOCK HEIGHT |
0.394 INCHES NOMINAL |
| CWTD |
CLAMPING HOLE QUANTITY |
4 |
| CWWM |
CLAMPING HOLE DIAMETER |
0.390 INCHES NOMINAL SECOND HOLE |
| CWWM |
CLAMPING HOLE DIAMETER |
0.266 INCHES NOMINAL FIRST HOLE |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR |
| AXPC |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES |
1.186 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| CWWM |
CLAMPING HOLE DIAMETER |
0.266 INCHES NOMINAL FOURTH HOLE |
| CWYH |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES |
1.874 INCHES NOMINAL |
| AZGM |
MOUNTING FACILITY |
UNTHREADED HOLE |
| AGAV |
END ITEM IDENTIFICATION |
F18 E/F |
| CWWM |
CLAMPING HOLE DIAMETER |
0.266 INCHES NOMINAL THIRD HOLE |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AGAV |
| CWXC |
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER |
0.562 INCHES NOMINAL |
| CWXZ |
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES |
0.749 INCHES NOMINAL |
| SUPP |
SUPPLEMENTARY FEATURES |
A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
| AFEC |
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH |
0.197 INCHES NOMINAL |