| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.719 INCHES NOMINAL |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERBORED |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.122 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AHLH |
SECOND LEG END WIDTH |
1.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.140 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
2.750 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.619 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
W/S:AIRCRAFT, TOMCAT F-14 |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.719 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE-AMS-QQ-A-250/11,TY 4 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.310 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.194 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2,CL 1 MIL SPEC 4TH TREATMENT RESPONSE |
| FEAT |
SPECIAL FEATURES |
ZLEG ONE HAS 8 ADDITIONAL HOLES (WITH SAME DIAMETER) PLACED BETWEEN ALREADY MENTIONED HOLES AND THE ANGLE; LEG TWO HAS ONE ADDITIONAL HOLE (DIAMETER OF 0.187 INCHES) PLACED 0.750 INCHES ABOVE FAR RIGHT HOLE ALREADY MENTIONED AND ANGLE |
| AHLF |
SECOND LEG WIDTH |
4.578 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BAY 1 STOWAGE BRACKET |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQN |
FIRST LEG WIDTH |
4.578 INCHES NOMINAL |