| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.188 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.188 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, FWD END, CENTER RACK |
| AHLF |
SECOND LEG WIDTH |
9.940 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
9.940 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541, CLASS 1A FED SPEC SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.560 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
RIGHT EDGE HAS PLATE, 0.188 IN. THICK ATTACHED PERPENDICULARLY; PLATE IS 4.00 W X 2.56 H WITH UPPER RIGHT CORNER CUTOUT 2.40 W X 1.06 H AND CUTOUT CORNER ROUNDED TO RADIUS OF 0.25 AND CORNERS ON LOWER RIGHT PART CUTOFF 0.25 X 0.25; PLATE HAS 2 SLOTS WITH RADII OF 0.110 AND DISTANCE BETWEEN CENTERS, 0.262, CENTERED 0.748 FROM BOTTOM WITH LEFT ARCS CENTERED 0.788 & 3.188 FROM LEFT EDGE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.440 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.440 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.747 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLK |
FIRST LEG LENGTH |
1.600 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |