| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM A967 ASSN STD SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.468 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.370 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHQN |
FIRST LEG WIDTH |
1.800 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLF |
SECOND LEG WIDTH |
1.800 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5604 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.628 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| ADLL |
SECOND LEG LENGTH |
1.435 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.880 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
WHISTLE CONTR |
| AJFP |
FIRST LEG END RADIUS |
0.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.370 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |