| AHLK |
FIRST LEG HOLE DIAMETER |
0.200 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET,ANGLE,90 DEG,CRES,0.190 BOLT |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AGAV |
END ITEM IDENTIFICATION |
ELECTRICAL INSTL, AFT COMP |
| ADLL |
SECOND LEG LENGTH |
1.633 INCHES MINIMUM AND 1.643 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.500 NOMINAL INCHES |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |