| CQCF |
CONSTRUCTION |
ONE-PIECE |
| ABHP |
OVERALL LENGTH |
2.688 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| ADPW |
OUTSIDE CORNER RADIUS |
0.180 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD ALL MATERIAL RESPONSES OR QQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.395 INCHES MINIMUM AND 2.405 INCHES MAXIMUM |
| ABVL |
APERTURE DIAMETER |
1.250 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
1.812 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.141 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| AECS |
BOLT HOLE QUANTITY |
4 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.144 INCHES NOMINAL |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.525 INCHES MINIMUM AND 1.535 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 |
| FEAT |
SPECIAL FEATURES |
TWO HOLES,0.126 IN. MIN DIA TO 0.129 IN. MAX DIA,ONE ON EACH SIDE IN THE CENTER ALONG THE WIDTH |