| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.280 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
1.625 INCHES NOMINAL |
| PRMT |
PRECIOUS MATERIAL |
SILVER AND GOLD |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.210 INCHES NOMINAL |
| ADPQ |
INSIDE CORNER RADIUS |
0.030 INCHES MAXIMUM |
| ADUF |
APERTURE LENGTH |
0.900 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.167 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| MATT |
MATERIAL |
COPPER ALLOY 360 |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.203 INCHES NOMINAL |
| ADUP |
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH |
0.405 INCHES NOMINAL |
| ADUQ |
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH |
0.405 INCHES NOMINAL |
| ADUE |
APERTURE WIDTH |
0.400 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.625 INCHES NOMINAL |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
EXTERNAL SILVER AND EXTERNAL SURFACES GOLD |
| SFTT |
SURFACE TREATMENT |
SILVER AND GOLD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,1/2H FED SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.173 INCHES NOMINAL |