| AAUB |
HOLE DIAMETER |
0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
RETROFIT ECP 1257 F-16A-D |
| ABMK |
OVERALL WIDTH |
1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.890 INCHES MINIMUM AND 0.950 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| FEAT |
SPECIAL FEATURES |
TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 1.690 IN. MIN AND 1.750 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-25-/11 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |