| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/1,TEMP H14 FED SPEC SINGLE MATERIAL RESPONSE |
| CQCF |
CONSTRUCTION |
ONE-PIECE |
| ABHP |
OVERALL LENGTH |
1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.146 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| CTRH |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH |
0.237 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.179 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| ADUF |
APERTURE LENGTH |
0.898 INCHES MINIMUM AND 0.902 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
MASK ALL MATING SURFACES AND HOLES; EPOXY PRIME COAT ONLY OUTSIDE EDGES OF SHIM PER RPR17003 TYPE I OR II; ORIGINAL NAME-SPACER,PLATE; OUTSIDE CORNERS ARE CHAMFERED 0.100 IN. X 45.0 DEG |
| ADUE |
APERTURE WIDTH |
0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| ADPQ |
INSIDE CORNER RADIUS |
0.015 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F-15I |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUM |
OVERALL THICKNESS |
0.010 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 1100 |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CTSC |
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH |
0.449 INCHES MINIMUM AND 0.451 INCHES MAXIMUM |