| CRYQ |
SURFACE CONDITION DEGREE |
SURFACED FOUR SIDES |
| SUPP |
SUPPLEMENTARY FEATURES |
U/I-BOARD FOOT |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TABLE |
| CRPW |
WIDTH-LOCATION AND MEASURING METHOD |
4.000 INCHES ANY ACCEPTABLE DESCALED MAXIMUM OF STANDARD RANGE |
| CRJD |
RANDOM LENGTH |
6 FT AND LONGER. W/ MAX OF 10 PCT 6-9 FT,MIN OF 40 PCT 14 FT AND LONGER |
| CSTS |
TYPICAL WOOD PRODUCTS USE |
LIGHT FRAMING FOR HIGH QUALITY CONSTRUCTION, STUDS AND ROOF TRUSSES |
| CRXX |
MEASURING METHOD AND LENGTH |
6.000 FEET MINIMUM RANDOM |
| CRCL |
MOISTURE CONTENT RETENTION PERCENTAGE |
19.0 MAXIMUM |
| CQWY |
SPECIES-GRADE AND GRADING ASSOCIATION |
ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION 1 AND 2 CLEAR OR ANY ACCEPTABLE 35.00 NO. 1 DROP SIDING OR ANY ACCEPTABLE 35.00 1 AND 2 CLEAR OR PINE, SOUTHERN 35.00 NO. 2 LATH OR ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 SHOP OR REDWOOD NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 FACTORY OR PINE, SOUTHERN NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 2 LATH OR ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 DROP SIDING OR ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 CUTS OR ANY ACCEPTABLE 35.00 NO. 1 CUTS OR ANY ACCEPTABLE 35.00 NO. 1 SHOP OR REDWOOD 35.00 NO. 1 FACTORY |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-MM-L-751 GOVERNMENT SPECIFICATION |
| CSHP |
THICKNESS-LOCATION AND MEASURING METHOD |
2.000 NOMINAL ANY ACCEPTABLE DESCALED DEGREES |