| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TABLE |
| CQWY |
SPECIES-GRADE AND GRADING ASSOCIATION |
ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 DROP SIDING OR ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION 1 AND 2 CLEAR OR ANY ACCEPTABLE ANY GRADING ASSOCIATION NO. 2 LATH OR ANY ACCEPTABLE DIN GERMAN INSTITUTE OF STANDARDIZATION E.V. NO. 1 FACTORY OR ANY ACCEPTABLE DIN GERMAN INSTITUTE OF STANDARDIZATION E.V. NO. 1 FACTORY OR ANY ACCEPTABLE NATIONAL HARDWOOD LUMBER ASSOCIATION NO. 1 CUTS OR ANY ACCEPTABLE DIN GERMAN INSTITUTE OF STANDARDIZATION E.V. NO. 1 SHOP |
| CRYQ |
SURFACE CONDITION DEGREE |
ROUGH-UNSANDED FULL LENGTH |
| CRCL |
MOISTURE CONTENT RETENTION PERCENTAGE |
ANY ACCEPTABLE |
| CSTS |
TYPICAL WOOD PRODUCTS USE |
BEAMS, STINGERS, POSTS, COLUMNS AND STRUTS |
| CRPW |
WIDTH-LOCATION AND MEASURING METHOD |
6.000 INCHES ANY ACCEPTABLE DESCALED MAXIMUM OF STANDARD RANGE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-MM-L-751 GOVERNMENT SPECIFICATION |
| CRXX |
MEASURING METHOD AND LENGTH |
10.000 FEET MINIMUM RANDOM |
| CRJD |
RANDOM LENGTH |
10 FT AND LONGER WITH A MAX OF 10 PCT TO BE 10 FT LONG AND A MIN OF 50 PCT TO BE 14 FT AND LONGER |
| CSHP |
THICKNESS-LOCATION AND MEASURING METHOD |
6.000 NOMINAL ANY ACCEPTABLE DESCALED DEGREES |