| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
295.0 NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND |
| ABXF |
SHAFT LENGTH |
0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| ADAV |
OVERALL DIAMETER |
0.758 INCHES MAXIMUM |
| AAPN |
SECTION QUANTITY |
2 |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 NOMINAL |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.516 INCHES MAXIMUM |
| ABPM |
BODY DIAMETER |
0.516 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.0 KILOHMS ALL SECTIONS |
| ABHP |
OVERALL LENGTH |
1.797 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFM |
MAXIMUM STOP TORQUE |
32.00 INCH-OUNCES |
| AEFK |
MAXIMUM STARTING TORQUE |
4.50 INCH-OUNCES |
| AEFL |
MAXIMUM RUNNING TORQUE |
0.50 INCH-OUNCES |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0/+10.0 SINGLE SECTION |
| CQDB |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT |
-0.0/+0.0 25 DEG CELSIUS SINGLE SECTION AND -0.0/+2.5 0 DEG CELSIUS SINGLE SECTION AND -0.0/+5.4 -25 DEG CELSIUS SINGLE SECTION AND -0.0/+8.8 -55 DEG CELSIUS SINGLE SECTION AND -3.1/+3.1 85 DEG CELSIUS SINGLE SECTION AND -0.0/+6.9 120 DEG CELSIUS SINGLE SECTION |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| APXH |
TERMINAL LOCATION |
REAR-BOTTOM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| AXGY |
MOUNTING METHOD |
SHAFT W/PANEL SEAL AND STANDARD BUSHING |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.5 FREE AIR SINGLE SECTION |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
M SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.672 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.250 INCHES MAXIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 3 OCLOCK AND AT 9 OCLOCK |
| AEGD |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION |
3.0 |